Manual Exposure Shooting
You can shoot at your favorite exposure by manually setting the shutter speed and aperture value.
1Set the mode dial to 
(Manual Exposure Shooting).
2Press z on the control button.
3Select the shutter speed and aperture value using control button.
Control button | Feature |
v V | Aperture value |
|
|
b B | Shutter speed |
|
|
z | Return |
|
|
•Select a shutter speed from 1/2000 to 30 second.
•When the zoom is fully set to W side, you can select an aperture F3.5 or F8.0. When the zoom is fully set to T side, you can select an aperture F4.4 or F10.
4Press the shutter button to shoot the image.
Notes
•If proper exposure is not obtained by your settings, the setting value indicators on the screen will flash when the shutter button is pressed halfway down. You can shoot in this condition, but exposure readjustment is recommended.
•The flash is set to [Flash On] or [Flash Off].
zSetting the shutter speed and aperture value
The difference between the settings and proper exposure judged by the camera appears as an EV value on screen.
Shutter speed/aperture value
Exposure value
0EV is the value judged as the most suitable by the camera.
•When the shutter speed is one second or slower, the shutter speed is indicated by [”], for example, [1”].
•When you set the shutter speed slower, using a tripod is recommended to prevent the effects of vibration.
•When the shutter speed becomes slower than a certain speed, the NR slow shutter function is activated automatically to reduce image noise, and [NR] appears on the screen.
•If you select slow shutter speeds, it takes time to process the data.