Warning indicators and messages

Self-diagnosis display

If a code starting with a letter of the alphabet appears, your camera has a self- diagnosis display. The last two digits (indicated by ss) will differ depending on the state of the camera.

If you are unable to solve the problem even after trying the following corrective actions a few times, contact your Sony dealer or local authorized Sony service facility.

C:32:ss

•There is trouble with your camera's hardware. Turn the power off and on again.

C:13: ss

•The camera cannot read or write data on the “Memory Stick”. Re-insert the “Memory Stick” several times.

•An unformatted “Memory Stick” is inserted. Format the “Memory Stick” (page 48).

•The inserted “Memory Stick” cannot be used with your camera, or the data is damaged. Insert a new “Memory Stick” (page 88).

E:61: ss

E:91: ss

•A camera malfunction has occurred. Reset the camera (page 74), then turn the power on again.

Messages

If the following messages appear, follow the instructions.

Turn the power off and on again

•A problem with the lens has caused an error.

E

•The battery level is low. Charge the battery pack (t step 1 in “Read This First”). Depending on the conditions of use or the type of battery pack, the indicator may flash even though there are still 5 to 10 minutes of remaining battery time left.

For "InfoLITHIUM" battery only

•The battery pack is not a “InfoLITHIUM” type.

System error

•Turn the power off and then on again (t step 2 “Read This First”).

No Memory Stick

•Insert a “Memory Stick” (t step 3 “Read This First”).

Memory Stick error

•Insert the “Memory Stick” correctly.

•The inserted “Memory Stick” cannot be used in your camera (page 88).

•The “Memory Stick” is damaged.

•The terminal section of the “Memory Stick” is dirty.

Troubleshooting

Memory Stick type error

•The inserted “Memory Stick” cannot be used in your camera (page 88).

85