Inserting the “Memory Stick”

started Getting

Access lamp

1Open the battery/“Memory Stick” cover.

Slide the cover in the direction of the arrow.

2Insert the “Memory Stick.”

Insert the “Memory Stick” with the B mark facing toward the battery compartment as illustrated until it clicks.

3Close the battery/“Memory Stick” cover.

Removing the “Memory Stick”

Open the battery/“Memory Stick” cover, then press the “Memory Stick” once lightly.

Notes

•Insert the “Memory Stick” firmly until it clicks, otherwise a message such as “MEMORY STICK ERROR” will be displayed.

•Never remove the “Memory Stick” or turn off the power while the access lamp is lit up.

•You cannot record or edit images on a “Memory Stick” if the erasure prevention switch is set to the LOCK position.

Connector

Erasure

prevention switch

Label space

The position and shape of the erasure prevention switch may differ depending on the types of “Memory Stick” used.

17