Getting started
15GB
x
“Memory Stick” media that you can use
“Memory Stick Duo” media
You can also use a “Memory Stick PRO Duo”
media or “Memory Stick PRO-HG Duo”
media with the camera.
For details on the number of images/time that
can be recorded, see pages 24, 30, 34. Other
types of “Memory Stick” media or memory
card are not compatible with the camera.
“Memory Stick” media
You cannot use a “Memory Stick” media with
the camera.
x
To remove the “Memory Stick Duo” media
•Never remove the “Memory Stick Duo”
media/battery pack when the access lamp is
lit. This may cause damage to data in the
“Memory Stick Duo” media/internal
memory.
x
When there is no “Memory Stick Duo” media inserted

Images are stored in the camera’s internal

memory (approximately 11MB).

To copy images from the internal

memory to a “Memory Stick Duo”

media, insert the “Memory Stick Duo”

media in the camera, touch t

(Settings) t ("Memory Stick"

Tool) t [Copy].

x
To remove the battery pack
x
Checking the remaining battery charge

A remaining charge indicator appears on

the LCD screen.

•It takes about one minute until the correct
remaining charge indicator appears.
•The remaining charge indicator may not be
correct under certain circumstances.
•If the NP-FD1 battery pack (sold separately)
is used, the minute display is also shown
after the remaining charge indicator.
•If the camera is running on and you do not
operate the camera for about one minute, the
LCD screen becomes dark.
•If the camera is running on and you do not
operate the camera for about two minutes,
the camera turns off automatically (Auto
power-off function).
Note
Make sure that the access
lamp is not lit, then push the
“Memory Stick Duo” media in
once.
Access lamp
Notes
Slide the battery eject lever.
Be sure not to drop the
battery pack.
Battery eject
lever
High Low