Table of
contents
Operation
Search
MENU/Settings
Search Index
134GB

A connection cannot be established.

•The camera cannot be connected directly to a printer that is not compliant with the PictBridge
standard. Consult the printer manufacturer as to whether the printer is compliant with PictBridge or
not.
• Check that the printer is turned on and can be connected to the camera.
•S et [USB Connect] to [PictBridge] (page102).
• Disconnect the cable for multi-use terminal and connect it again. If an error message is indicated on
the printer, refer to the operating instructions supplied with the printer.

Cannot print images.

•Check that the camera and the printer are properly connected using Cable for multi-use terminal.
•Turn on the printer. For details, refer to the operating instructions supplied with the printer.
•If you select [Exit] during printing, images may not be printed. Disconnect the cable for multi-use
terminal and connect it again. If you still cannot print your images, disconnect the cable for multi-use
terminal once more, turn the printer off and then turn it on, and connect the cable again.
• Movies cannot be printed.
• Images shot using other cameras, or images m odified with a computer may not be print ed.
•Panoramic images may not be printed depending on the printer or may print in cut off panoramic
image.

Printing is canceled.

• The cable for multi-use terminal has been disconnected before the (PictBridge Connecting)
indicator was turned off.

Cannot insert the date or print images in the index mode.

• The printer does not provide these functions. Consult the printer manufacturer as to whether the
printer provides these functions or not.
•The date may not be inserted in the index mode depending on the printer. Consult the printer
manufacturer.

“---- -- --” is printed on the date-inserted part of the image.

•T he image does not have the recording data so the date cannot be inserted. Set [Date] to [Off] and
print the image again (page 124).

Cannot print the image at the size selected.

• When you replace the printer paper with paper of a differe nt size after connecting the printer to the
camera, disconnect the cable for multi-use terminal connected to the printer and then reconnect the
printer.
•The print setting of the camera differs from that of the printer. Change the setting of either the camera
(page124) or the printer.
• Consult the printer manufacturer as to whether the printer can provide the desired size.

Cannot operate the camera after canceling printing.

•Wait for a while as the printer is carrying out the cancellation. It may take some time depending on
the printer.
PictBridge-compliant printer