Sony DSC-TX5 Touch panel Others

Table of
contents
Operation
Search
MENU/Settings
Search Index
138GB
Cannot print the image at the size selected.
• When you replace the printer paper with paper of a differe nt size after connecting the printer to the
camera, disconnect the cable for multi-use terminal connected to the printer and then reconnect the
printer.
•The print setting of the camera differs from that of the printer. Change the setting of either the camera
(page127) or the printer.
• Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot operate the camera after canceling printing.
•Wait for a while as the printer is carrying out the cancellation. It may take some time depending on
the printer.
Cannot operate the touch panel buttons correctly or fully.
•P erform [Calibration] (page 108).
•[Ho using] is set to [On] (page102).
The paint pen operation reacts at inappropriate points.
•P erform [Calibration] (page 108).
The lens gets fogged.
• Moisture condensation has occurred. Eject the battery pack and the memory card, then leave the
camera in a dry place with the battery/memory card cover open until the moisture evaporates.
The camera becomes warm when you use it for a long time.
• This is not a malfunction.
The Clock Set screen appears when you turn on the camera.
• Set the date and time again (page 116).
• The internal rechargeable backup battery has discharged. Insert a charged battery, and set aside for
24hours or more with the power left off.
The date or time is incorrect.
•The Area Setting is set to a different location than your current location. Change the setting by
t (Settings) t (Clock Settings) t [Area Setting].
Touch panel
Others