50GB
Troubleshooting
If you experience trouble with the camera, try the following solution s.
On repairing cameras with internal memory function included, data in the camera may
be checked on minimum necessity to verify and improve the malfunction symptoms.
Sony will not copy or save any of those data.
Cannot insert the battery pack.
•Insert the battery pack correctly by pushing the battery eject lever ( page 14).
Cannot turn on the camera.
•After inserting the battery pack into the camera, it may take a few moments for the camera to
power up.
•Insert the battery pack correctly (page14).
•The battery pack is discharged. Insert a charged battery pack (page 12).
•The battery pack is dead. Replace it with a new one.
•Use a recommended battery pack.
The power turns off suddenly.
•Depending on the camera and battery temperature, the power may turn off automatically to
protect the camera. In this case, a message is displayed on the LCD screen before the power
turns off.
•If you do not operate the camera for about three minutes while the power is on, the camera
turns off automatically to prevent wearing down the battery pack. Turn on the camera again
(page16).
•The battery pack is dead. Replace it with a new one.
1Check the items below, and refer to “Cyber-shot Handbook” (PDF).
2Remove the battery pack, wait for about one minute, re-insert the batter y
pack, then turn on the power.
3Initialize the settings (page44).
4Consult your Sony dealer or local authorized Sony service facility.

Battery pack and power