Table of
contents
Operation
Search
MENU/Settings
Search Index
90GB
Cannot select the Face Detection function.
•You can select Face Detection only when the focus mode is set to [Multi AF] and the metering mode
is set to [Multi].
The flash does not work.
• You cannot use the flash when:
– Burst mode is selected (page 37).
– (High Sensitivity) or (Twilight) mode is selected in Scene Selection.
– Shooting in Movie Mode.
• Set the flash to (On) (page 20) when the Scene Selection mode is set to (Landscape),
(Gourmet), (Pet), (Beach), (Snow) or (Underwater) mode.
Fuzzy white circular spots appear in images shot using the flash.
•Particles (dust, pollen, etc.) in the air reflected the flash light and appeared in the image. This is not a
malfunction.
The close-up shoot function (Macro) does not work.
•The camera automatically adjusts the focus. Press and hold the shutter button halfway down. Focus
adjustment may take some time when shooting a close subject.
• (Landscape) or (Twilight) mode is selected in the Scene Selection.
The date and time are not displayed on the LCD screen.
• While shooting, the date and time are not displayed. They are displaye d only during playback.
Cannot insert dates on images.
• This camera does not have a feature for superimposing dates on images . By using “PMB”, you can
print or save images with the date (page80).
The F value and shutter speed flash when you press and hold the shutter button
halfway down.
•The exposure is incorrect. Correct the exposure (page38).
The image colors are not correct.
•Adjust the White Balance (page 40).
White or purple streaks appear in bright areas of the subject , or the whole screen
of the image becomes reddish.
•This phenomenon is called smearing. This is not a malfunction. Smearing is not recorded on still
images, but is recorded as streaks or uneven colors on movies.
(“Bright areas” refers to the sun or electric lights which are much brighter than surroundings.)
Noise appears in the image when you view the screen in a dark place.
•The camera is attempting to increase the visibility of the screen by temporarily brightening the image
under conditions of low illumination. There is no effect on the recorded image.