Table of
contents
Operation
Search
MENU/Settings
Search Index
122GB
Cannot copy the data on the memory card or the computer to the internal
memory.
• This feature is not available.
Cannot print an image.
•Refer to the operation manual of the printer.
Images are printed with both edges cut off.
• Depending on your printer, all the edges of the image may be cut off. Especially when you print an
image shot with the image size set to [16:9], the lateral end of the image may be cut off.
•When printing images using your printer, cancel the trimming or borderless settings. Consult the
printer manufacturer as to whether the printer provides these functions or not.
• When having images printed at a digital print shop, ask the shop whet her they can print the images
without cutting off both edges.
Cannot print images with the date.
• Using “PMB”, you can print images with date (page 109).
• The camera does not have a feature for superimposing da tes on images. However, because the images
shot with the camera include information on the recording date, you can print images with the date
superimposed if the printer or the software can recognize Exif information. For compatibility with
Exif information, consult the manufacturer of the printer or the software.
• If you use a photo printing service, ask them to superimpose the date s on images.
The lens gets fogged.
• Moisture condensation has occurred. Turn off the camera and leave it for about an hour before using
it.
The camera turns off with the lens portion extended.
• The battery pack is discharged. Replace it with a charged battery pack, then turn the camera on again.
•Do not attempt to force the lens that has stopped moving.
The camera becomes warm when you use it for a long time.
• This is not a malfunction.
The Clock Set screen appears when you turn on the camera.
• Set the date and time again (page 104).
• The internal rechargeable backup battery has discharged. Insert a charged battery, and set aside for
24hours or more with the power left off.
The date or time is incorrect.
•The Area Setting is set to a different location than your current location. Change the setting by
MENU t (Settings) t [Clock Settings] t [Area Setting].
PrintingOthers