[To check the remaining battery charge

Press POWER button to turn on and check the remaining battery on the LCD screen.

Battery

 

 

 

 

 

remaining

 

 

 

 

 

indicator

 

 

 

 

 

Battery

Sufficient

Battery

Battery half

Battery low,

Change the battery

remaining

power

almost fully

full

recording/

with fully charged

guidelines

remaining

charged

 

playback

one, or charge the

 

 

 

 

will stop

battery. (The warning

 

 

 

 

soon.

indicator flashes.)

•If the NP-FD1 battery pack (not supplied) is used, the minute display ( 60 Min) is also shown after the battery remaining indicator.

•It takes about one minute until the correct battery remaining indicator appears.

•The displayed battery remaining indicator may not be correct under certain circumstances.

•The Clock Set screen appears when the camera is turned on for the first time (page 13).

[To remove the battery pack/“Memory Stick Duo”

Open the battery/“Memory Stick Duo” cover.

“Memory Stick Duo”

Battery pack

Make sure that the access lamp is not lit,

Slide the battery eject lever.

then push the “Memory Stick Duo” in once.

Be sure not to drop the battery pack.

•Never remove the battery pack/“Memory Stick Duo” when the access lamp is lit. This may cause damage to data in the “Memory Stick Duo”/internal memory.

•Use the NP-BD1 battery pack (supplied) only with this camera.

12