1 Preparing the battery pack
For customers in the USA and Canada
For customers in countries/regions other than the USA and Canada
| Plug |
| to the wall outlet |
| to the wall |
| outlet |
| CHARGE lamp |
CHARGE lamp | Power cord (mains lead) |
The CHARGE lamp lights up, and charging starts.
When the CHARGE lamp turns off, charging is finished (Practical charge).
If you continue charging the battery pack for about one more hour (until it is fully charged), the charge will last slightly longer.
[ Charging timeFull charge time | Practical charge time |
Approx. 220 min. | Approx. 160 min. |
|
|
•The table above shows the time required to charge a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances.
•See page 34 for the number of images that can be recorded.
•Connect the battery charger to the nearest wall outlet (wall socket).
•Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
•When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger.
•Designed for use with compatible Sony batteries.
11