Quick Start Guide

Preparation

Shooting

Playback

The battery pack

1Charge the battery pack until the CHARGE lamp lights off.

CHARGE lamp2 Insert the battery pack into the camera.

Firmly insert the battery pack all the way while pressing the lock lever with the tip of the battery.

The lens1 Remove the caps.Do not touch inside parts.

If dust enters the camera, it may appear on the photo image. Do not leave the camera and lens without the caps. When you change the lens, do it quickly in a location free from dust.

2Attach the lens. Align the marks.
The memory cardDate/time setup
1 Turn the camera on.2 Set up the date/time. Face side with a labelWhen inserting a memory card, turn the camera off.For available memory cards, refer to the Instruction Manual.
1Set the mode dial to AUTO.
Check that the LIVE VIEW/OVF switch is set to “LIVE VIEW.”
2Check the subject on the LCD monitor.
3Press the shutter button halfway down to focus.

Pressing the shutter button halfway down and holding it activates the autofocus.

LIVE VIEW/OVF switchHold the grip of thecamera.Support the lens from below.
Press
To play back a previous or next image: press / on the controller.To return to the shooting mode:
To delete the image
Press
To fully enjoy the features of your single lens reflex
camera, consult the “Instruction Manual.”
Turn the lens until it clicks.
down to shoot.