Others
165
For details, refer to the operating instructions supplied with the printer or
consult with the manufacturer of the printer.
A connection cannot be established.
• The camera cannot be connected directly to a printer th at is not compliant
with the PictBridge standard. Consult the printer manufacturer as to
whether the printer is compliant with PictBridge or not.
• Set [USB connection] to [PTP] (page152).
• Disconnect and connect the USB cable again. If an error me ssage is
indicated on the printer, refer to the operating instructions supplied with the
printer.
Cannot print images.
• RAW images cannot be printed.
• Images shot using cameras other than this camera or images mo dified with
a computer may not be printed.
“---- -- --” is printed on the date-inserted part of the image.
• Images that do not have the recording data cannot be printed with the date
inserted. Set [Date imprint] to [Off] and print the image again (page155).
The message “Set date and time?” appears when you turn on the camera.
• The camera has been left unused for sometime with a low battery or no
battery pack. Charge the battery pack and set the date again (page27). If the
date setting is lost every time the battery pack is charged, consult your Sony
dealer or local authorized Sony service facility.
The number of recordable images does not decrease or decreases two at
a time.
• This is because the compression rate and the image size af ter compression
change depending on the image when you shoot a JPEG image (page 108).
PictBridge compliant printerOthers