Sony Loading saved data from a “Memory Stick”

Data Setting User the Loading and Saving 6 Chapter

(P00 to P19), that are the pages to save and call up the data to and from “Memory Stick”.

1 Display the USER FILE LOAD page or the USER FILE SAVE page of the USER FILE menu.

For details on menu operations, see “Basic menu operations” on page 93.

2 Press the MENU knob. Then turn the MENU knob to move b to DISPLAY MODE, and press the MENU knob again.

bchanges to z and z changes to ?.

3 Turn the MENU knob until the desired type of the display contents (see the following table) appears, then press the MENU knob.

Display type	Description
ALL	File ID (10 characters) and date
	(month/day/year)
F.ID	File ID (16 characters)
DATE	Saved date (year/month/day/
	hours/minutes/seconds)
MODEL	Information on the model

zchanges to b and ? changes to z. The selection is set.

Loading saved data from a “Memory Stick”

Note

The data loaded from the “Memory Stick” overwrites the data saved in the camcorder.

1 Display the USER FILE page of the FILE menu.

For details on menu operations, see “Basic menu operations” on page 93.

2 Press the MENU knob. Then turn the MENU knob to move b to USER FILE LOAD, and press the MENU knob again.

The P00 USER LOAD page appears.

?P00 USER LOAD		ESC
DISPLAY MODE	:	ALL
001.USER1	JAN/01/04
002.USER2	JAN/15/04
003.NO FILE
004.USER4	FEB/05/04
005.USER5	FEB/20/04

3 Turn the MENU knob until the page which contains the desired file appears.

4 Press the MENU knob. Then turn the MENU knob to move b to the desired file number to be loaded, and press the MENU knob again.

The message “LOAD OK? YES b NO” appears.

P00 USER LOAD			ESC
LOAD	OK?	YES	NO
DISPLAY	MODE	:	ALL
001.USER1		JAN/01/04
002.USER2		JAN/15/04
003.NO	FILE
004.USER4		FEB/05/04
005.USER5		FEB/20/04

5 To carry out the load, turn the MENU knob to move b to YES and press the MENU knob.

To cancel, press the MENU knob leaving b pointing to NO.

The access indicator lights.

When the load is completed, the message “COMPLETE” appears and the access indicator goes off.

The USER FILE page appears again.

If data cannot be loaded

If one of the following error messages appears during or after the load operation, then the data was not loaded.

Error message	Cause	Action
NO MEMORY	No “Memory Stick”	Insert or reinsert
STICK (flashing)	is inserted.	the “Memory
		Stick”.
MEMORY STICK	Circuit or “Memory	Recheck, and
ERROR (flashing)	Stick” fault.	consult your Sony
		representative.
FILE ERROR	The “Memory	You cannot load
(flashing)	Stick” contains	data saved from
	data that cannot be	another
	loaded into this	camcorder.
	camcorder.

112 Saving and Loading User Files