Step 2 Preparing the power supply
Setting up the type of the battery pack
Set up the type of the battery pack installed to the camcorder, using the menu. If you do not set the type, the battery remaining indicator will not indicate the correct capacity.
(1) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to display the menu.
(2) Turn the SEL/PUSH EXEC dial to select , then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select uREMAIN, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the type of the battery pack, then press the dial.
Setting | Meaning |
When using a | |
|
|
When using a nicad battery pack | |
|
|
(5) Push the CUSTOM PRESET/MENU switch in the MENU direction and release it to make the menu disappear.
1
CUSTOM PRESET | MENU |
TC/UB SET
TC PRESET
UB PRESET
TC RUN
TC MAKE UB T I ME
[MENU] : END
2,3
5 | CUSTOM PRESET | MENU |
|
4
SETUP MENU
CLOCK SET
LTR S I ZE
REMA I N
SETUP MENU
CLOCK SET
LTR S I ZE
[MENU] : END
REMA I N
RETURN
[MENU] : END
When the battery capacity is low
The BATT and REC lamps (red) in the viewfinder and the TALLY lamps on the camcorder will flash.
10