TV Hookups

This connection is for listening to the sound through TV speakers

(L: left, R: right). Refer to the instructions supplied with the component to be connected.

Be sure to set the LINE SELECT switch to OUT.

zYou can enjoy surround sound using your TV’s built-in speakers

You can use 3D sound imaging to create virtual rear speakers from the sound of builtin TV speakers without using actual rear speakers (VES TV: Virtual Enhanced Surround TV). For details, see page 60.

Required cords

Audio/Video connecting cord (supplied) (1)

Yellow

Yellow

White (L)

Black

Red (R)

S video cord (not supplied) (1)

When connecting the cords, be sure to match the color-coded cord to the appropriate jacks on the components: Yellow (video) to Yellow, Red (right) to Red and White (left) to White. Connect the Black jack of the audio/video connecting cord to AUDIO OUT (White) on the player. Be sure to make connections firmly to avoid hum and noise.

If your TV has an S video input connector, connect the component via the S VIDEO OUT connector using an S video cord (not supplied) instead of the video connecting cord. You will get a better picture.

16Getting Started