Note

Depending on the DVD, “4:3 Letter Box” may be selected automatically instead of “4:3 Pan Scan” or vice versa.

◆Angle Mark

Displays the angle mark when you can change the viewing angles during playback of DVDs recorded with multi-angles.

On

Display the angle mark.

 

 

Off

Hide the angle mark.

 

 

◆Screen Saver

The screen saver image appears when you leave the player in pause or stop mode for 15 minutes. The screen saver will help prevent your display device from becoming damaged (ghosting). Press H to turn off the screen saver.

On

Activates the screen saver

 

function.

 

 

Off

Deactivates the screen saver

 

function.

 

 

◆PBC

By using the PBC (Playback Control) function, you can enjoy playing interactive programmes and programmes with search functions (page 20). This set up is effective when you play back VIDEO CDs with the PBC function. Set up becomes available by opening and closing the disc lid after setting.

On

By the PBC function, you can

 

play back VIDEO CDs via the

 

menu screen.

 

 

Off

Turn off the PBC function.

 

 

◆DivX

Displays the registration code for this player. For more information, go to http://www.divx.com

on the Internet.

◆Default

Each function returns to its original factory settings. Note that all of your settings will be lost.

Settings for the Sound

(Audio Setup)

“Audio Setup” allows you to set the sound according to the playback and connection conditions.

Select “Audio Setup” in the Setup Display. To use the display, see “Using the Setup Display” (page 33).

The default settings are underlined.

Audio Setup

Audio DRC

Off

Digital Output

On

Select: ENTER Cancel: RETURN

◆Audio DRC (Dynamic Range Control) (DVD only)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “Audio DRC.”

This function affects the output from the following jacks:

– AUDIO jack

– OPTICAL OUT jack only when “Dolby Digital” is set to “Downmix PCM” (page 36).

On

Makes low sounds clear even if

 

you turn the volume down.

 

 

Off

Normally select this position.

 

 

◆Digital Output

Selects if audio signals are output via the OPTICAL OUT jack.

On

Normally select this position.

 

When you select “On,” see

 

“Setting the digital output signal”

 

for further settings.

 

 

Off

The influence of the digital circuit

 

upon the analog circuit is

 

minimal.

 

 

Adjustments and Settings

,continued 35