4 Press Aon the player, and place a disc on the disc tray.

Playing Discs

Playing Discs

Depending on the DVD or VIDEO CD, some operations may be different or restricted.

Refer to the operating instructions supplied with your disc.

Power

indicatorA

[/1 H

Z [/1

AUDIO

With the playback side facing down

5 Press H.

The disc tray closes, and the player starts playback (continuous play). Adjust the volume on the TV or the amplifier (receiver).

Depending on the disc, a menu may appear on the TV screen. For DVDs, see page 32. For VIDEO CDs, see page 32.

To turn off the player

Press [/1. The player enters standby mode.

zHint

The player will turn off automatically whenever you leave it in stop mode for more than 30 minutes (Auto Power off function).

H

1 Turn on your TV.

2 Press [/1.

The player turns on and the power indicator lights up in green.

3 Switch the input selector on your

TV so that the signal from the player appears on the TV screen.

When using an amplifier (receiver)

Turn on the amplifier (receiver) and select the appropriate channel so that you can hear sound from the player.

Notes on playing DTS sound tracks on a CD

When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks. To avoid possible damage to the audio system, the consumer should take proper precautions when the

analog stereo jacks of the player are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be connected to the digital jack of the player.

Set the sound to “STEREO” using the AUDIO button when you play DTS sound tracks on a CD (page 50).

Do not play DTS sound tracks without first connecting the player to an audio component having a built-in DTS decoder. The player outputs the DTS signal via the DIGITAL OUT (COAXIAL or OPTICAL) jack even if “DTS” in “AUDIO SETUP” is set to “OFF” in the Setup Display (page 70), and may affect your ears or cause your speakers to be damaged.

28