19Press ENTER.

“SUBWOOFER” is selected.

SPEAKER SETUP(DVD)

SIZE:

 

 

 

 

 

 

 

DISTANCE:

 

 

 

 

 

 

 

LEVEL(FRONT):

 

 

 

 

 

 

 

LEVEL(REAR):

OFF

TEST TONE:

 

FRONT:

 

 

 

 

LARGE

 

CENTER:

 

 

 

 

 

 

YES

 

REAR:

 

 

 

 

 

NONE

 

SUBWOOFER:

 

 

 

 

 

 

YES

20Press X/x to select whether or not you have connected a subwoofer.

21Press ENTER.

Quick Setup is finished. All connections and setup operations are complete.

If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 86).

Enjoying the surround sound effects

To enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 24 to 26 ( B through D ). Each of these is the default setting and does not need to be adjusted when you first connect the player. See page 80 for using the Setup Display.

Audio Connection (pages 24 to 26)

A

• No additional settings are needed.

B-1 C-1

•Set “DOWNMIX” to “DOLBY SURROUND” (page 85).

B-2 C-2 D-2

•Set “DOWNMIX” to “DOLBY SURROUND” (page 85).

•Set “DIGITAL OUT” to “ON” (page 85).

D-1

•Set “DISTANCE,” “LEVEL (FRONT),” and “LEVEL (REAR)” according to the connected speakers (page 88).

zHints

• For connections B-2C-2D-2

Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency (page 86).

• For connections B-1C-1D-1

If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 85).

•For DVP-NS955V

The speaker size you set in steps 16 through 20 will also adjust the Super Audio CD speaker size of “SPEAKER SETUP.” If you want to change the speaker size for Super Audio CDs, you can set in “SPEAKER SETUP” (page 87).

Hookups

31