69
Additional Information

Additional Information

Troubleshooting
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
The power is not turned on.
,Check that the AC power cord is connected
securely.
There is no picture.
,The connecting cords are not connected
securely.
,The connecting cords are damaged.
,The player is not connected to the cor rect TV
input jack (page 18).
,The video input on the TV is not set so that you
can view pictures on the player.
Picture noise appears.
,The disc is dirty or flawed.
,If the picture output from your player goes
through your VCR to get to your TV, the copy-
protection signal applied to some DVD
programs could affect picture quality. If you
still experience problems even when you
connect your player directly to your TV,
please try connecting your player to your TV’s
S video input (page 18).
Even though you set the aspect ratio
in “TV TYPE” of “SCREEN SETUP,”
the picture does not fill the screen.
,The aspect ratio of the disc is fixed on your
DVD.
There is no sound.
,The connecting cord is not connected securely.
,The connecting cord is damaged.
,The player is connected to the wrong input
jack on the amplifier (receiver) (page 20, 22,
24).
,The amplifier (receiver) input is not changed
so that you can listen to the player.
,The player is in pause mode or in Slow-motion
play mode.
,The player is in fast forward or fast reverse
mode.
,If the audio signal does not come through the
DIGITAL OUT (COAXIAL or OPTICAL)
jack, check the audio settings (page 66).
Sound is noisy.
,The disc is dirty or flawed.
,When playing a CD with DTS sound tracks,
noise will come from the LINE OUT L/R
(AUDIO) 1/2 jacks (page 33).
Sound distortion occurs.
,Set “AUDIO ATT” in “AUDIO SETUP” to
“ON” (page 66).
The remote does not function.
,There are obstacles between the remote and
the player.
,The distance between the remote and the
player is too far.
,The remote is not pointed at the remote se nsor
on the player.
,The batteries in the remote are weak.

Power

Picture

Sound

Operation

continued ,