D-1 : Connecting to the 5.1 ch input jacks

You can enjoy 5.1 ch surround sound using the internal Dolby Digital, DTS, or Super Audio CD Multi decoder of this player.

D-2 : Connecting to a digital input jack

This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV amplifier (receiver). You are not able to enjoy the surround sound effects of this player.

zHints

•For connection D-2

For correct speaker location, refer to the operating instructions of the connected components.

•To enhance the sound performance:

–Use high-performance speakers.

–Use front, rear, and center speakers of the same size and performance.

–Place the subwoofer between the left and right front speakers.

Notes

For connection D-2

•After you have completed the connection, be sure to set “DOLBY DIGITAL” to “DOLBY DIGITAL” and “DTS” to “DTS” in Quick Setup (page 30).

•When you connect an amplifier (receiver) that conforms to the 96kHz sampling frequency, set “48kHz/96kHz PCM” in “AUDIO SETUP” to “96kHz/24bit” (page 83).

•Super Audio CD audio signals are not output from the DIGITAL OUT jack.

Hookups

29