Resuming Playback from the Point Where You Stopped the Disc (Resume

Play)

•When playing a DATA CD, the point where you stopped is cleared when the player enters standby mode, the disc tray is opened, or the mains lead is disconnected.

•This function may not work with some discs.

•Resume Play does not work during Shuffle Play and Programme Play.

The player remembers the point where you stopped the disc even if the player enters standby mode by pressing [/1.

1 While playing a disc, press x to stop playback.

“RESUME” appears on the front panel display.

2 Press H.

The player starts playback from the point where you stopped the disc in Step 1.

zHint

To play from the beginning of the disc, press x twice, then press H.

Notes

•The resume playback point for the current disc is cleared when:

–you change the play mode.

–you change the settings on the Setup Display.

–you disconnect the mains lead (CD or DATA CD/ DATA DVD only).

•When playing a DVD-RW in VR mode, the point where you stopped is cleared when the disc tray is opened or the mains lead is disconnected.

•When playing a CD, the point where you stopped is cleared when the disc tray is opened or the mains lead is disconnected.

Discs Playing

23