This connection will use your TV’s or stereo amplifier’s (receiver’s) two speakers for sound. Connect using the audio/video cord (not supplied).
Yellow | Yellow |
White (L) | White (L) |
Red (R) | Red (R) |
If your AV amplifier (receiver) has a Dolby*1 Digital, DTS*2 or MPEG audio decoder and a digital input jack, use this connection.
Connect using a coaxial or optical (DVP- NS52P only) digital cord (not supplied).
Coaxial cord
Optical cord
Hookups
• Surround effect (page 44)
TV: Dynamic Theatre, Dynamic, Wide, Night
Stereo amplifier (receiver): Standard, Night
• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch), MPEG audio (5.1ch)
*1 Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic,” and the
*2 “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Notes
•After you have completed the connection, make the appropriate settings in Quick Setup (page 22). If your AV amplifier (receiver) has an MPEG audio decoder function, set “MPEG” to “MPEG” in Audio Setup (page 69). Otherwise, no sound or a loud noise will come from your speakers.
•The surround sound effects of this player cannot be used with this connection.
•In order to listen to DTS sound tracks, you must use this connection. DTS sound tracks are not output through the LINE OUT L/R (AUDIO) jacks, even if you set “DTS” to “ON” in Quick Setup (page 22).
,continued 21