Sony DVP-NS500V Settings for the Sound

xCD DIRECT

Eliminates the use of unnecessary circuits when playing CDs.

This setting will be activated when you open/ close the disc tray.

This function affects the output of the following jacks:

—LINE OUT L/R (AUDIO) 1/2 jacks

—5.1CH OUTPUT jacks

OFF	Select this when playing CD discs,
	including CD type DTS discs.
ON	Eliminates the use of unnecessary
	circuits needed to play CDs.

Note

If you select “ON” when playing CD type DTS discs, the sound will become noisy.

Settings for the Sound

(AUDIO SETUP)

“AUDIO SETUP” allows you to set the sound according to the playback and connection conditions.

Select “AUDIO SETUP” in the Setup Display. For details on using the display, see “Using the Setup Display” (page 72).

The default settings are underlined.

AUDIO SETUP

AUDIO ATT:		OFF
AUDIO DRC:		STANDARD
AUDIO FILTER:		SHARP
DOWNMIX:	DOLBY SURROUND
DIGITAL OUT:		ON
DOLBY DIGITAL:		D-PCM
DTS:		D-PCM
48kHz/96kHz PCM:		48kHz/16bit

xAUDIO ATT (attenuation)

If the playback sound is distorted, set this
item to “ON.” The player reduces the audio
output level.
		Settings
This function affects the output of the
following jacks:
— LINE OUT L/R (AUDIO) 1/2 jacks
— 5.1CH OUTPUT jacks		and
OFF	Turns off the audio attenuation.
	Normally, select this position.	Adjustments
ON	Reduces the audio output level so that
	no sound distortion occurs.
	Select this when the playback sound
	from the speakers is distorted.

xAUDIO DRC (Dynamic Range Control) (DVD VIDEO/DVD-RW only)

Makes the sound clear when the volume is turned down when playing a DVD that has the “AUDIO DRC” function. This affects the output from the following jacks:

—LINE OUT L/R (AUDIO) 1/2 jacks

—5.1CH OUTPUT jacks

continued

77