Resuming Playback from the Point Where You Stopped the Disc

(Multi-disc Resume)

The player stores the point where you stopped the disc for up to 6 discs and resumes playback the next time you insert the same disc. When you store a resume playback point for the seventh disc, the resume playback point for the first disc is deleted.

1 While playing a disc, press x to stop playback.

“RESUME” appears on the front panel display.

2 Press H.

The player starts playback from the point where you stopped the disc in Step 1.

zHints

•To play from the beginning of the disc, press x twice, then press H.

•For DVD-RWs in VR mode, CDs, and DATA CDs, the player remembers the resume playback point for the current disc unless the disc tray is opened, the power cord is disconnected, or only for DATA CDs, the player enters standby mode.

Notes

•“MULTI-DISC RESUME” in “CUSTOM SETUP” must be set to “ON” (default) for this function to work (page 67).

•The resume playback point for the current disc is cleared when:

–you change the play mode.

–you change the settings on the Setup Display.

• This function may not work with some discs.

• Resume Play does not work during Shuffle Play and Program Play.

• If “MULTI-DISC RESUME” in “CUSTOM SETUP” is set to “ON” and you playback a recorded disc such as DVD-RW, the player may playback other recorded discs from the same resume point. To play from the beginning, press x twice and then press H.

Discs Playing

29