This connection will use your TV’s or stereo amplifier’s (receiver’s) two speakers for sound. Connect using the audio/video cord (supplied).
Yellow | Yellow |
White (L) | White (L) |
Red (R) | Red (R) |
• Surround effect (page 43)
TV: Dynamic Theater, Dynamic, Wide, Night
Stereo amplifier (receiver): Standard, Night
If your AV amplifier (receiver) has a Dolby Digital*1 or DTS*2 decoder and a digital input jack, use this connection.
Connect using a coaxial or optical digital cord/HDMI cord (not supplied).
Coaxial cord 
Optical cord 
HDMI cord
• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch)
*1 Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the
*2 “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Notes
•After you have completed the connection, be sure to set “DOLBY DIGITAL” to “DOLBY DIGITAL” and “DTS” to “ON” in Quick Setup (page 23).
•When you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency, set “48kHz/96kHz PCM” in “AUDIO SETUP” to “96kHz/24bit” (page 67).
•The surround sound effects of this player cannot be used with this connection.
•When you connect the player to an AV amplifier
(receiver) using an HDMI cord, you will need to do one of the following:
–Connect the AV amplifier (receiver) to the TV with the HDMI cord.
–Connect the player to the TV with a video cord other than HDMI cord (component video cord, S VIDEO cord, or audio/video cord).
22