6 Press X/x to select the setting that matches your TV type.
◆If you have a
• 16:9 (page 33)
◆If you have a 4:3 standard TV
•4:3 LETTER BOX or 4:3 PAN SCAN (page 33)
7 Press ENTER.
The Setup Display for selecting the type of jack used to connect your audio component appears.
Is this player connected to an amplifier (receiver) ? Select the type of jack you are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
8 Press X/x to select the type of jack (if any) you are using to connect to an audio component, then press
ENTER.
Select “NO,” if you do not connect an audio component, then go to step 12. Select “YES: LINE OUTPUT L/R (AUDIO),” if you connect an audio component using an audio cord, then go to step 12.
Select “YES: DIGITAL OUTPUT,” if you connect an audio component using a digital coaxial/HDMI cord.
9 Press X/x to select the type of
Dolby Digital signal to your audio component.
If your audio component has a Dolby Digital decoder, select “DOLBY DIGITAL.” Otherwise, select
AUDIO SETUP
AUDIO DRC: |
| STANDARD |
DOWNMIX: | DOLBY SURROUND | |
DIGITAL OUT: |
| ON |
DOLBY DIGITAL: |
| DOLBY DIGITAL |
DTS: |
| DOLBY DIGITAL |
48kHz/96kHz PCM: | ||
10Press ENTER.
“DTS” is selected.
AUDIO SETUP
AUDIO DRC: |
| STANDARD | |
DOWNMIX: | DOLBY SURROUND | ||
DIGITAL OUT: |
|
| ON |
DOLBY DIGITAL: |
| DOLBY DIGITAL | |
DTS: |
|
| OFF |
48kHz/96kHz PCM: |
| OFF | |
|
|
| ON |
11Press X/x to select whether or not to send a DTS signal to your audio component.
If your audio component has a DTS decoder, select “ON.” Otherwise, select “OFF.”
12Press ENTER.
Quick Setup is finished and connections are complete.
b
When “PhotoTV HD” mode is activated (page 30), the selection for “TV TYPE” is skipped.