7 Press X/x to select the setting that matches your TV type.

◆If you have a 4:3 standard TV

•4:3 LETTER BOX or 4:3 PAN SCAN (page 63)

◆If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode

• 16:9 (page 63)

8 Press ENTER.

The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears.

Is this player connected to an amplifier (receiver)? Select the type of jack you are using.

YES

LINE OUTPUT L/R(AUDIO)

DIGITAL OUTPUT

NO

9 Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press

ENTER.

If you did not connect an AV amplifier (receiver), select “NO,” then go to step 13.

If you connected an AV amplifier (receiver) using just an audio cord, select “YES: LINE OUTPUT L/R (AUDIO),” then go to step 13.

If you connected an AV amplifier (receiver) using a digital coaxial or optical/HDMI cord, select “YES:

DIGITAL OUTPUT.”

10Press X/x to select the type of

Dolby Digital signal you wish to send to your amplifier (receiver).

If your AV amplifier (receiver) has a Dolby Digital decoder, select “DOLBY DIGITAL.” Otherwise, select “D-PCM.”

AUDIO SETUP

AUDIO ATT:

 

OFF

AUDIO DRC:

 

STANDARD

AUDIO FILTER:

 

SHARP

DOWNMIX:

DOLBY SURROUND

DIGITAL OUT:

 

ON

DOLBY DIGITAL:

 

D-PCM

DTS:

 

D-PCM

48kHz/96kHz PCM: DOLBY DIGITAL

11Press ENTER.

“DTS” is selected.

AUDIO SETUP

AUDIO ATT:

 

 

OFF

AUDIO DRC:

 

STANDARD

AUDIO FILTER:

 

 

SHARP

DOWNMIX:

DOLBY SURROUND

DIGITAL OUT:

 

 

ON

DOLBY DIGITAL:

 

 

D-PCM

DTS:

 

 

OFF

48kHz/96kHz PCM:

 

OFF

 

 

 

ON

12Press X/x to select whether or not you wish to send a DTS signal to your amplifier (receiver).

If your AV amplifier (receiver) has a DTS decoder, select “ON.” Otherwise, select “OFF.”

13Press ENTER.

Quick Setup is finished. All connections and setup operations are complete.

24