To enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 25 to 27 ( B through D ). Each of these is the default setting and does not need to be adjusted when you first connect the player. Refer to page 73 for using the Setup Display.
Audio Connection (pages 24 to 27)
A
• No additional settings are needed.
•Set “DOWNMIX” to “DOLBY SURROUND” (page 79).
•If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 78).
•Set “DOWNMIX” to “DOLBY SURROUND” (page 79).
•Set “DIGITAL OUT” to “ON” (page 79).
•Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency (page 80).
•Set “DISTANCE,” “BALANCE,” and “LEVEL” according to the connected speakers (page 82).
•If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 78).
32