Playback

Playing Discs

Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc.

PICTURE TV TV

NAVI

Number buttons

 

TIME/TEXT

CLEAR

AUDIO SUBTITLE

TOP MENU

MENU

ENTER

RETURNDISPLAY

RETURN

FAST/SLOW

PLAY

1 Push OPEN/CLOSE on the top panel to open the disc lid.

2 Fit the disc to the pivot, and close the lid until it clicks.

Playback side facing down

The player starts playback (continuous play) and the N indicator lights up. Adjust the volume on the TV or the audio component.

Depending on the disc, a menu may appear on the TV screen. For DVD VIDEOs, see page 7. For VIDEO CDs, see page 15.

If a disc is inside the player

Press N.

To stop playback

Press x.

To pause playback

Press X.

z

You can have the player turned off automatically whenever you leave it in stop mode for more than 30 minutes. To turn this function on or off, set “AUTO POWER OFF” in “CUSTOM SETUP” to “ON” or “OFF” (page 29).

b

Discs created on DVD recorders must be correctly finalized before they can be played. For more information about finalizing, refer to the operating instructions supplied with the DVD recorder.

Note on playing DTS sound tracks on a

DVD VIDEO

DTS audio signals are output only through the DIGITAL OUT (COAXIAL) jack.

To resume playback from the point where you stopped the disc (Multi-disc Resume)

When you press N again after you stop playback, the player starts playback from the point when you pressed x.

z

•To play from the beginning of the disc, press x twice, then press N.

•With DVD VIDEOs and VIDEO CDs, the player stores the point where you stopped the disc for up to 6 discs and resumes playback the next time you insert the same disc. If you store a resume playback point for the seventh disc, the resume playback point for the first disc is deleted.

14