5.1 Channel Surround Hookups

Started Getting

With DVDs which contain DTS, Dolby* Digital or MPEG AUDIO sound, you can enjoy the surround sound while producing the effect of being in a movie theater or a concert hall, using a digital component with a built-in DTS, Dolby Digital or MPEG decoder (not supplied). The player outputs the surround sound signals from the DIGITAL OUT OPTICAL and COAXIAL connectors.

Note

When a DVD has a sound track with 7.1 channels recorded in MPEG AUDIO format, the output audio signals are mixed down to 5.1 channels.

Setups for the player

Some setups are necessary for the player depending on the components to be connected.

Use the setup display to change the various settings. For details on using the setup display, see page 39.

•When you play a DVD or CD that are recorded in DTS format

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “DTS” to “ON” in the setup display. (page 49)

Required cords

Audio cords (not supplied)

One for the LINE OUT AUDIO jacks

White (L)

White (L)

Red (R)

Red (R)

Optical or coaxial digital cord (not supplied)

One for the DIGITAL OUT jacks

or

S video cord (supplied)

One for the S VIDEO OUT jacks

Connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied). You do not need to connect both of these cords. See the figure on the next page.

•When you play a DVD that is recorded in Dolby Digital format

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “DOLBY DIGITAL” to “DOLBY DIGITAL” in the setup display. (page 48)

•When you play a DVD that is recorded in MPEG format

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “MPEG” to “MPEG” in the setup display. (page 49)

Notes

•Refer to the instructions supplied with the component to be connected.

•When you do not connect an audio component with a built in DTS decoder, do not set “DTS” to “ON.”

•When you do not connect an audio component with a built in DOLBY DIGITAL decoder, do not set “DOLBY DIGITAL” to “DOLBY DIGITAL.”

•When you do not connect an audio component with a built in MPEG decoder, do not set “MPEG” to “MPEG.”

Notes

•Do not connect the power cord to an AC outlet or press the POWER switch before completing all connections.

•Refer to the instructions supplied with the component to be connected.

•The cord connectors should be fully inserted into the jacks. Loose connection may cause hum and noise.

•Jacks and plugs of the connecting cords are color-coded as follows:

Red jacks and plugs: Right audio channel

White jacks and plugs: Left audio channel

* Manufactured under license from Dolby Laboratories. “Dolby”, “AC-3”, “Pro Logic” and the double-D symbol aare trademarks of Dolby Laboratories.

Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.

12