2+1 Channel Surround Hookups
Started Getting
This connection is for listening to the sound through the left and right speakers of the TV, or speakers connected to a receiver and the subwoofer. You can enjoy rich bass frequencies by connecting a subwoofer. Refer to the instructions supplied with the component to be connected.
Set “SUBWOOFER” in “SPEAKER SETUP” to “YES” in the setup display (page 57). Then set “FRONT SPEAKER SIZE” to “TV” when you use the TV’s speakers, or to “LARGE,” “MIDDLE” or “SMALL” when you use the speakers connected to the receiver.
zYou can enjoy surround sounds even if you connect front speakers only
Required cords
Audio connecting cord (not supplied) (1)
White (L) | White (L) |
Red (R) | Red (R) |
S video cord (not supplied) (1)
When connecting the cords, be sure to match the
You can use 3D sound imaging to create virtual rear speakers |
| Monaural audio cord (not supplied) (1) | ||
from the sound of the front speakers (L, R) without using actual |
| |||
| One for a subwoofer | |||
rear speakers (Virtual Enhanced Surround). For details, see page |
| |||
|
|
| ||
35. |
|
|
|
|
CD/DVD player |
|
|
|
|
AUDIO OUT | DIGITAL OUT | VIDEO OUT | S VIDEO OUT COMPONENT VIDEO OUT | |
R L | PCM/DTS/MPEG/ |
|
|
|
1 | DOLBY DIGITAL |
|
|
|
| COAXIAL OPTICAL | 1 | 1 | Y |
|
|
| ||
|
| 2 | 2 |
|
2 |
|
|
|
|
To an AC outlet
To AUDIO | To AUDIO | To S VIDEO |
OUT | OUT | OUT |
(WOOFER) |
|
|
To S VIDEO input
TV
|
| INPUT |
| To audio input | VIDEO |
|
| |
|
| S VIDEO |
Subwoofer |
| L |
(Active type) |
| AUDIO |
R
or
INPUT
Receiver (Amplifier)
To audio input | CD |
| L |
| R |
: Signal flow
Notes
You cannot enjoy a picture with an S video signal if your TV does not conform to the S video signal. When your TV does not have an S VIDEO input, connect the component via the VIDEO INPUT connector using the video connecting cord (not supplied) instead of the S video cord. For details, see page 8.
Refer to the instructions supplied with your TV.
12