51
Settings and Adjustments
Speaker Set Up
Select “SPEAKER SETUP” after pressing SET UP.
To obtain the best possible surround sound, first specify
the size of speakers you have connected and their distance
from your listening position, then set the balance and
level. Then use the test tone to adjust the speaker
volumes to the same level.
For the speaker hook ups, see pages 12 to 13.
pSIZE
Selects the size of the speakers to be connected.
• FRONT
—LARGE: Normally select this.
—SMALL: When the sound cracks or the effects of the
surround is difficult to hear, select this. This
activates the Dolby Digital bass redirection circuitry
and outputs the bass frequencies of the speaker from
subwoofers.
• CENTER
—NONE: If you will not connect a center speaker,
select this.
—LARGE: Normally select this.
—SMALL: When the sound cracks, select this. This
activates the Dolby Digital bass redirection circuitry
and outputs the bass frequencies of the speaker from
some other speakers .
• REAR
—NONE: If you will not connect a rear speaker, select
this.
—LARGE: Normally select this.
—SMALL: When the sound cracks or the effects of the
surround is difficult to hear, select this. This
activates the Dolby Digital bass redirection circuitry
and outputs the bass frequencies of the speaker from
some other speakers .
• SUBWOOFER
—NONE: If you do not connect a subwoofer, select
this. This activates the Dolby Digital bass redirection
circuitry and outputs the LFE signals from the front
speakers.
—YES: If you connect a subwoofer, select this to output
the LFE (low frequency effects) channel from the
subwoofer.
Notes on playing the DTS sound tracks on a DVD
•No sounds will come out from the LINE OUT (AUDIO 1, 2)
and PHONES connectors.
•If the player is connected to an audio component lacking a
built-in DTS decoder, do not set “DTS” in “DIGITAL OUT” to
“ON” in the setup display. Otherwise, when you play the DTS
sound track, a loud noise will come out from the speakers,
affecting your ears or causing the speakers to be damaged.
•When you set “DTS” in “AUDIO SETUP” to “OFF,” no sound
will come out from the DIGITAL OUT OPTICAL and
COAXIAL connectors even if you play DTS sound tracks on
DVDs.
•The DTS indicator on the front panel display lights up when
you play DTS sound tracks.
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL: OFF
TEST TONE:
FRONT:
CENTER: LARGE
LARGE
YES
LARGE
REAR:
SUBWOOFER:
To set, press , then .
To quit, press .
ENTER
SETUP