Adjustments and Settings
Settings for the Speakers (SPEAKER SETUP)
xBALANCE
You can vary the balance of the left and right speakers as follows. Be sure to set “TEST TONE” to “ON” for easy adjustment (see xTEST TONE below). The default adjustments are in parentheses.
•FRONT (0dB)
Adjust the balance between the front left and right speakers
•REAR (0dB)
Adjust the balance between the rear left and right speakers
To return to the default setting
Select the item, then press CLEAR.
xLEVEL
You can vary the level of each speaker as follows. The front speaker level becomes the criterion for adjusting the other speakers. Be sure to set “TEST TONE” to “ON” for easy adjustment (see x TEST TONE below). The default adjustments are in parentheses.
•CENTER (0dB)
Adjust the level of the center speaker
•REAR (0dB)
Adjust the level of the rear speakers
•SUBWOOFER (0dB)
Adjust the level of the subwoofer
To return to the default setting
Select the item, then press CLEAR.
xTEST TONE
The speakers will emit a test tone. Use this when you use the 5.1CH OUTPUT connectors and adjust the BALANCE and LEVEL.
•OFF: The test tone is not emitted from the speakers.
•ON: The test tone is emitted from each speaker in sequence. When you select one of the “SPEAKER SETUP” items, the test tone is emitted from both left and right speakers simultaneously.
Note
When you adjust the speaker settings, the sound cuts off for a moment.
Adjusting the speaker volume
1After you stop playback, select “SPEAKER SETUP” in the setup display.
2Select “TEST TONE” and set “TEST TONE” to “ON.”
You will hear the test tone from each speaker in sequence.
3From your listening position, select “BALANCE” or “LEVEL” and adjust the value of “BALANCE” using </, and “LEVEL” using M/m.
The test tone is emitted from both left and right speakers simultaneously.
4Select “TEST TONE” and set “TEST TONE” to “OFF” to turn off the test tone.
To adjust the volume of all the speakers at one time
Use the receiver’s (amplifier’s) volume control.
58