Selects whether or not to output DTS signals.
OFF | Select this when the player is |
| connected to an audio |
| component without a |
| DTS decoder. |
|
|
ON | Select this when the player is |
| connected to an audio |
| component with a |
| decoder. |
|
|
•When you play a DVD VIDEO with DTS sound tracks, set “DTS” to “ON” in “AUDIO SETUP” (page 31).
•If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to “ON” in “AUDIO SETUP” (page 31). A loud noise may come out from the speakers, affecting your ears or causing the speakers to be damaged.
◆48kHz/96kHz PCM (DVD VIDEO only)Selects the sampling frequency of the audio signal.
48kHz/16bit The audio signals of DVD VIDEOs are always converted to 48kHz/16bit.
96kHz/24bit All types of signals including 96kHz/24bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as 48kHz/16bit.
b
The analog audio signals from the AUDIO OUT L/R jacks are not affected by this setting and keep their original sampling frequency level.
Adjustments and Settings