Notes on operation and storage

Protect the unit from violent shocks
It is possible to damage the internal circuitry and
mechanism or spoil the external finish.
After use
Turn the power switch off.
When not using the unit for a long period
Remove the cassette and batteries.
Operating and storage locations
Store the unit in a level place which is well ventilated.
Avoid operation or storage in the following locations:
• In extremely hot or extremely cold conditions
• In extremely dusty conditions
• In very high humidity
•Where the unit will be subjected to severe vibration
•Close to strong magnetic fields
• Exposed to direct sunlight for long periods, or close
to heating equipment
Cleaning the video heads
Use the Sony BCT-5CLN or BCT-D12CL Cleaning
Cassette for cleaning the audio and video heads.
Follow the instructions with the cleaning cassette.
Related manuals
In addition to this Operation Manual, the following
manuals are available.
These should be consulted as necessary.
• Maintenance Manual Part 1 (supplied)
Describes the maintenance of this unit.
• Maintenance Manual Part 2 (option)
Contains circuit diagrams and adjustment procedures
required for the maintenance of this unit.
Condensation
If you move the unit suddenly from a cold place to a
warm place, or use it in a very humid location,
condensation may form on the head drum. If the unit
is operated in this state, the tape may adhere to the
drum, and cause a failure or even permanent damage.
Take the following steps to prevent this from
happening:
• Remove the cassette before operating the unit in
conditions where condensation is likely to form.
•If the HUMID indication is showing, condensation is
present: wait until the HUMID indication disappears,
and then insert a cassette.
• Do not load a cassette on which condensation has
formed into the unit.
Chapter 1 Overview 1 -3