Introduction
Specifications
Safety Regulations
Compatible discs | Read | Write |
| (max.) | (max.) |
DVD+R (4⋅) | ||
DVD+R (8⋅) | ||
DVD+R (16⋅) | ||
DVD+R Double Layer | 2.4⋅ | |
DVD+R Double Layer (8⋅) | ||
DVD+RW | 2.4⋅ | |
DVD+RW (4⋅) | 4⋅ | |
| ⋅ | ⋅ |
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
CAUTION:As the laser beam in the
The use of controls or adjustments or performance of procedures other than those specified
DVD/CD
System Requirements
The drive should be used with a system that meets the following requirements1).❑Windows® XP Home Edition or Windows® XP Professional (referred to as Windows XP)
1)The above requirements the minimum necessary requirements to write to disc normally. Under actual operating conditions, the requirements imposed by your software must also be met. For details, refer to your software documentation.
2)The drive does not support connection to an ATAPI interface card. Connect the drive to the IDE (ATAPI) interface connector of your computer’s motherboard.
3)The drive consumes a lot of power when operating at high speeds. You should therefore make sure that the rated power output of the power outlet where you connect all your drives is sufficient to power all the drives, including this one. For details about each drive’s power consumption rating, refer to their documentation.
DVD+RW (High Speed) 12 | ||
4⋅ | ||
− | ||
− | ||
− | ||
8⋅ | − | |
− | ||
Disc diameters |
|
|
DC +5 V | 1.5 A max. |
DC +12 V | 1.5 A max. |
Rewritable Drive Unit
Product Information
Included Documents❑Quick Start Guide❑Electronic manual on the software disc❑Warranty card❑Product Information (this document)Package Contents
Please verify that the package includes the following accessories with the drive when unpacking.
If any of these items appears to be missing or damaged, please contact your supplier.
• Drive | • Screws (⋅4) |
| • Product Information (this document) |
| • Quick Start Guide |
| • Software disc |
| • Warranty card |
Make sure that you back up the supplied software disc on another disc because the software disc is not distributed independently.
Please Record ResponsiblyBefore copying anything onto a disc, please be sure that you are not violating copyright laws. Most software companies allow you to make a backup or archive copy of software. Check your software’s license agreement for details.
DVD 12 cm | − |
8 cm4) |
1)Use a
2)The default setting is 40⋅. You must use the turbo boost function to achieve 48⋅ speed.
3)This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. When you use this unit as an audio CD player, please use compact discs with the following mark.
4)With 8 cm discs, you must place the drive horizontally.Writing SystemsDVD
Random writeSequential writeCD
Wavelength: 783 nmOutput power (max): 90 mW (CW) 260 mW (Pulse)DVD
Wavelength: 658 nmOutput power (max): 80 mW (CW) 300 mW (Pulse)InterfaceDrive interfaceATAPIDas Etikett mit der Aufschrift LASER KLASSE 1 PRODUKT befindet sich auf der Oberseite des Gehäses.
CLASS 1 | LUOKAN 1 LASERLAITE | |
LASER PRODUCT | ||
| ||
|
| |
LASER KLASSE 1 | KLASS 1 LASER APPARAT | |
PRODUKT |
Diese Ausrüstung erfüllt die Europäischen
DW-G120A
2006 Sony Corporation | Printed in China | P/N: 7819901471W |
Please refer to this manual together with the “ATAPI Interface Drive User’s Guide” in the attached Software Disc, which carries more detailed information.
FrançaisTurbo Boost Function
The defaultWith a single touch, you can activate the Turbo Boost function, to raise the read/write speed to 48⋅ speed.
2 Press and hold the Eject button for |
five seconds. |
CD
• | are trademarks of Sony Corporation. |
•Microsoft, MS,
•Other system and product names used herein are registered trademarks or trademarks of their respective manufacturers, although the TM and ® marks are not used in the text.
Before using this device, be sure to read the
l’utilisateur” contenu sur le disque du logiciel accompagnant ce produit pour plus de détails.
DeutschEinzelheiten entnehmen Sie bitte diesem Handbuch sowie der “Laufwerk mit
Consulte este manual junto con la “Unidad de interfaz ATAPI - Guía del usuario” del disco de software suministrado, que contiene información más detallada.
Note
•On rare occasions, some discs may not be able to tolerate 48⋅ speed, causing them to break. We
recommend that you do not use deeply scratched, brittle, or other discs that may break at 48⋅ speed.
•The Turbo Boost function does not guarantee a 48⋅ write speed. Depending on the condition of the disc you are using, the speed may be automatically lowered.
•The Turbo Boost function does not increase read/write speed withThe Busy indicator blinks twice and the |
read/write speed switches to 48⋅ speed. |
(The Turbo Boost function is active.) |
When you open the disc tray, the read/write speed reverts to its default of 40⋅ speed.
Product and Support Information
Sony Global Sites Information (As of January, 2006)
Product purchased in the USA:* | About the Bundled Writing Software | |
http://sony.storagesupport.com/ | Detailed information about the supplied | |
Product purchased in Europe:* | writing software is available on the Web | |
sites of the software manufacturers and | ||
http://www.sonyisstorage.com/ | ||
software distributors. (Accessible from the | ||
* Local Web sites for computer peripheral products | ||
links in each software application) | ||
|
❑ Our product warranty is valid only when the supplied accessories (including software) are used in the |
specified or recommended system environment, in accordance with the documentation, and applies |
only to this DVD/CD rewritable drive. Our customer service and user support apply only under these |
product warranty conditions. |
❑ Please note that we cannot accept responsibility for failure of the computer or other devices, |
incompatibility with special hardware, operating problems caused by improper installation of software, |
loss of data, discs or other accidental or incidental damage that might occur when using this product. |
❑ The guarantee and user support for this product are valid only within the countries or sales regions |
specified on the warranty card. |
❑ Copyright laws prohibit the copying in part or in full of the supplied software and documentation, or |
loaning the software, without obtaining permission of the copyright holder. |
❑ We cannot accept responsibility for any direct or indirect financial damage or loss of profit that might |
occur when using the supplied software. |
❑ The supplied software can only be used with this product. |
❑ Specifications of the supplied software may be changed without notice in the interest in product |
Fare riferimento al presente manuale insieme a “Guida dell’utilizzatore dell’unità disco con interfaccia ATAPI” nel disco del software allegato, nel quale sono contenute informazioni più dettagliate.
PortuguêsConsulte este manual juntamente com o “Guia do Utilizador do Drive de Interface ATAPI” incluído no disco de software fornecido, para obter informações mais detalhadas.
NederlandsRaadpleeg deze handleiding alsook de “ATAPI
DVD region codes
The playback of
With this drive, the region code can be set up to five times, including the initial assignment (RPC phase 2 standard). After setting the region code five times, the setting becomes permanent and can no longer be changed. From this point on, you are only able to play
Do not attempt to make unauthorized changes to the region code. Any problems resulting from doing so are not covered by the warranty.
Hint
You can change the region code of the drive on it’s properties dialog box accessible from the Device Manager.
Technical Support
Please consult the above sources before calling with questions about using this product, or with technical questions about the drive or the supplied software. If using telephone or
Local technical support is only available in the specified sales regions. The customers in these regions should be provided with a warranty card for this product. For contact information, refer to the warranty card.
Note that technical support conditions may vary according to the locality, and that charges and/or limited service may apply in some regions.
improvement. |
Compliance Statements
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection
systems)This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this
product. The recycling of materials will help to conserve natural resources.For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Förutom denna bruksanvisning finns mer information i “Brukanvisning för enhet med ATAPI gränssnitt” på den medföljande programskivan.