VISCA Device Setting
Command
Before starting control of the FCB series camera, be sure to send the Address command and the IF_Clear command using the broadcast function.
For VISCA Network Administration●Address
Sets an address of a peripheral device. Use when initializing the network and when receiving the network change message indicated below.
●Network Change
Sent from the peripheral device to the controller when a device is removed from or added to the network. The address must be
| Packet | Note |
Address | 88 30 01 FF | Always broadcasted. |
Network Change | X0 38 FF |
|
X = 9 to F: FCB series camera address + 8
VISCA Interface Command●IF_Clear
Clears the command buffers in the FCB series camera and cancels the command currently being executed.
| Command Packet Reply Packet Note | |
IF_Clear | 8X 01 00 01FF | X0 50 FF |
IF_Clear (broadcast) | 88 01 00 01 FF | 88 01 00 01 FF |
X = 1 to 7: FCB series camera address (For inquiry packet)
X = 9 to F: FCB series camera address +8 (For reply packet)
Command List
VISCA Interface and Inquiry●IF_DeviceTypeInq
Returns information on the VISCA interface.
Inquiry | Inquiry Packet | Reply Packet | Description |
IF_DeviceTypeInq | 8X 09 00 02 FF | Y0 50 GG GG HH | GGGG = Vender ID |
| HH JJ JJ KK FF | (0020: Sony) |
|
|
|
| HHHH = Model ID |
|
|
| |
|
|
| |
|
|
| JJJJ = ROM revision |
|
|
| KK = Maximum socket # (02) |
X = 1 to 7: FCB series camera address (For inquiry packet)
X = 9 to F: FCB series camera address +8 (For reply packet)
23