23 GB
GB
For the setting method, see “Overview of the Menus” (page22).
*: Not selected during PC input.
Menu Function and operation
Picture Mode You can choose a picture quality to match your picture type an d surrounding brightness.
Tip
To change from one “Picture Mode” option to another, you can also use PICTURE
button (page 16) on the remote control inst ead.
Vivid Enhances picture sharpness, and maximizes contrast.
Standard Flat setting.
Custom Adjusts in more detail.
Conference Adjusts the picture quality for video conferencing under fluorescent lights.
“Conference” may not be effective depending on the environment of use or your video
conference system. In this case, adjust the picture using “Picture Mode Adjust.”
(page23), or switch to a “Picture Mode” setting other than “Conference”.
Picture Mode Adjust You can adjust picture quality for each “Picture Mode” in more detail.
• “Backlight”, “Noise Reduction” and “CineMotion” settings are common for all
“Picture Mode”.
• During PC input, you cannot adjust “Chroma”, “Phase”, “Sharpness”, “Noise
Reduction” or “CineMotion”.
Backlight Adjusts LCD screen brightness.
Contrast Adjusts to increase or decrease contrast.
Brightness Adjusts picture brightness.
Chroma * Adjusts color intensity.
Phase * Adjusts the color tones of the picture.
“Phase” is available if the video signal's color system is NTSC.
Sharpness * Adjusts to sharpen or soften the picture.
Noise Reduction * Reduces noise from connected equipment. Higher settings ar e effective when there is a
lot of noise.
Off/Low/Mid/High
CineMotion * Select “Auto” or “Off”. If you select “Auto”, it optimizes the screen display
automatically by detecting picture content and applying a reverse 3-2 or 2-2 pull-down
process. The picture will appear clearer and more natural.
• “CineMotion” may not be correctly processed depending on the input signal pattern.
• The setting of “CineMotion” is invalid when displaying 1080/50i, 1080/60i or 1080/
24psf signal with “Aspect” set to “Wide Zoom” or “Zoom”.
Note
Notes
Note
Notes