Controlling the volume of your AV amplifier (receiver) with the remote
aSlide the TV/DVD switch to DVD.

bHold down [/1, and enter the manufacturer code (see the table below) for your AV amplifier (receiver) using the number buttons.

cRelease [/1.

The 2 (volume) +/– buttons control the AV amplifier’s volume.

◆ If you want to control the TV’s volume

Slide the TV/DVD switch to TV.

zHint

If you want to control the TV’s volume even when the TV/DVD switch is set to DVD, repeat the steps above and enter the code number 90 (default).

Code numbers of controllable AV amplifiers (receivers)

If more than one code number is listed, try entering them one at a time until you find the one that works with your AV amplifier (receiver).

Manufacturer

Code number

 

 

Sony

80, 88, 89, 91

 

 

Denon

84, 85, 86

 

 

Kenwood

92, 93

 

 

Onkyo

81, 82, 83

 

 

Pioneer

99

 

 

Sansui

87

 

 

Technics

97, 98

 

 

Yamaha

94, 95, 96

 

 

Note

If you cannot control the volume of your Sony AV amplifier (receiver) with the remote, try entering the code number 91, and change the command mode of your amplifier (receiver) to “COMMAND MODE [AV1]” (not all amplifiers have this option).

See the instructions supplied with your amplifier (receiver) to change the command mode.

Connecting a VCR or Similar Recording Device to the LINE3 Jack

You can use this recorder as the source player or as the recording deck. See “Recording From Equipment Connected to the LINE IN Jacks” in the separate booklet “Operating Instructions” when connecting to the LINE 2 IN or LINE 4 IN jacks. Disconnect the recorder’s mains lead from the mains when connecting the VCR or recording device.

How to connect to record

Connect a VCR or similar recording device to the LINE 3/ DECODER jack of this recorder. Then press INPUT SELECT to select “L3.” You are ready to start recording.

If you are using this recorder as the recording deck, see “Recording from Equipment Connected to the LINE IN jacks” in the separate booklet “Operating Instructions.”

If you are using this recorder as the source player, refer to the instructions of the connected device for recording instructions.

TV

to SCART (EURO AV) input

SCART (EURO AV) cord (not supplied)

VCR

to i

 

 

to i LINE

 

LINE1-TV

 

 

3/DECODER

DVD recorder

AERIAL

LINE 1 - TV

LINE 3/DECODER

 

IN

 

 

 

 

 

 

 

Y

~ AC IN

 

COAXIAL

 

 

 

 

 

LINE 4 IN

LINE 2 OUT

 

OUT

 

R-AUDIO-L VIDEO S VIDEO

R-AUDIO-L VIDEO S VIDEOCB

 

 

OPTICAL

 

 

 

 

 

 

CR

 

 

DIGITAL OUT

 

COMPONENT

 

 

PCM/DTS/MPEG/

 

 

 

DOLBY DIGITAL

 

VIDEO OUT

 

zHint

If you are using another recorder with S VIDEO and AUDIO IN/OUT jacks, you can connect those jacks to this recorder’s S VIDEO and R- AUDIO-L IN/OUT jacks.

Notes

•If you pass the recorder signals via the VCR, you may not receive a clear image on the TV screen.

DVD recorder

 

 

 

VCR

 

 

 

TV

 

 

 

 

 

 

 

 

 

•SMARTLINK features are not available for devices connected via the DVD recorder’s LINE 3/DECODER jack.

•Pictures containing copy protection signals that prohibit any copying cannot be recorded.

22 Connecting a VCR or Similar Recording Device to the LINE3 Jack