46 Connections
Removing the camera
1Remove the 3 screws used to attach
the camera in step 6 of “Installation.”
2While pushing the entire camera up
towards the ceiling, move the camera
to the front.
The hooks will disengage, and you can
remove the camera.
Attach the camera using 3 M3 fixing screw
holes located on the bottom of the camera.
Attach the camera to a fitting with a flat
surface using M3 screws with the following
specifications.
Connections
Use the AC power adaptor and AC power
cord to connect the camera to an AC outlet.

Installing the Camera Using

the M3 Fixing Screw Holes

M3 screw
4 = 3 – 5 mm
4 = 1/8 – 7/32 inches

Connecting to an AC Outlet

DC 12 V
EVI-H100S/H100V