48 Connections
• In the case of VISCA RS-232C
connection, make sure that the BOTTOM
switch is set to RS-232C (page 41).
• It is not possible to conn ect both VISCA
RS-232C and VISCA RS-422
simultaneously.
• Do not mix VISCA RS-232C (cross) and
VISCA RS-422 cables. Using these cables
at the same time may result in
malfunction.
• Configure the, VIDEO FORMAT, based
on the specifications of the HD monitor.
• It takes about 7 to 16 seconds to display
the image.
• Configure the, VIDEO FORMAT, based
on the specifications of the HD monitor.
• Depending on the performance
capabilities of the DVI cable, some picture
noise may occur. In particular, be sure to
Connecting a Video Monitor, etc., Equipped with an Analog Component Input Connector
to component
input
connector
DC 12 V
VIDEO OUT
DVI to component
adapter cable
(not supplied)
HD video monitor, etc.
EVI-H100V
Notes
Connecting a Video Monitor, etc., Equipped with DVI Input
Connector
Notes
to DVI
input connector
DC 12 V
VIDEO OUT
DVI cable (not
supplied)
HD video monitor, etc.
EVI-H100V