SAFETY CHECK-OUT

After correcting the original service problem, perform the following safety checks before releasing the set to the customer: Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below.

LEAKAGE

The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microampers). Leakage current can be measured by any one of three methods.

1.A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers’ instructions to use these instruments.

2.A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job.

3.Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2V AC range are suitable. (See Fig. A)

To Exposed Metal

Parts on Set

 

 

 

 

 

 

 

 

AC

 

 

 

 

 

 

 

 

0.15 F

 

 

 

1.5 k

 

 

Voltmeter

 

 

 

 

 

 

 

 

 

 

(0.75 V)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Earth Ground

Fig. A. Using an AC voltmeter to check AC leakage.

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS

LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

HCD-XGR6/XGR60

NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT

The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body.

During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts.

The flexible board is easily damaged and should be handled with care.

NOTES ON LASER DIODE EMISSION CHECK

The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pick- up block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens.

LASER DIODE AND FOCUS SEARCH OPERATION CHECK

Carry out the “S curve check” in “CD section adjustment” and check that the S curve waveforms is output three times.

MODEL IDENTIFICATION

– Rear Panel –

PART No.

MODEL

PARTS No.

 

 

US model

4-237-748-0s

 

 

E model

4-237-748-2s

 

 

E51 model

4-237-748-3s

 

 

Mexican model

4-237-748-4s

 

 

Argentina model

4-237-748-5s

 

 

Abbreviation

E51 : Chilean and Peruvian model

3

Page 3
Image 3
Sony HCD-XGR60 specifications Safety CHECK-OUT, Leakage, Rear Panel, Parts No

HCD-XGR60 specifications

The Sony HCD-XGR60 is a sophisticated audio system designed to enhance your listening experience with its innovative features and robust sound quality. This mini hi-fi component system combines aesthetic appeal with practical functionality, making it an ideal choice for music lovers and audiophiles alike.

One of the standout features of the HCD-XGR60 is its powerful output, boasting a total of 240 watts. This energy translates into rich, immersive sound across various music genres, whether you are enjoying classical symphonies or the latest pop hits. The system includes a dual speaker configuration that maximizes audio distribution, ensuring that every corner of your room is filled with clear and dynamic sound.

The HCD-XGR60 employs advanced technologies to optimize sound performance. It is equipped with a CD player that supports a wide range of formats, including CD-R and CD-RW. This versatility allows users to play their favorite music without limitation. The inclusion of a digital AM/FM tuner further enhances this system, providing access to numerous radio stations and enabling listeners to discover new artists and genres. The built-in programmable memory function allows for personalized playlists, ensuring that your preferred tracks are always at your fingertips.

One of the key characteristics of the HCD-XGR60 is its connectivity options. The system features USB ports that allow users to easily connect and play music from external devices, such as flash drives and smartphones. Bluetooth compatibility is also integrated, enabling wireless streaming of music from smartphones and tablets, which is particularly convenient for those who prefer a cable-free experience.

Another notable aspect of the HCD-XGR60 is its sleek design. The compact form factor makes it easy to fit into various living spaces without sacrificing style. The front panel is user-friendly, equipped with intuitive controls for adjusting volume, navigating playlists, and selecting sources. Additionally, the system includes an integrated equalizer, giving users the ability to customize sound settings to suit their preferences.

In conclusion, the Sony HCD-XGR60 is a well-rounded audio system that brings together powerful sound, versatile playback options, and stylish design. Whether hosting gatherings or enjoying a quiet evening at home, this system promises an engaging auditory experience tailored to a wide array of musical tastes. Its combination of modern technology and thoughtful features makes it a compelling choice for anyone seeking a quality audio solution.