18 Installation
For the HDLA1507
While holding the camera lock lever on the front panel
upward, and pull the camera rearward until it stops
then remove it.
4
Close the rear panel.
Check that the rear panel is locked firmly.
Attaching a Large Viewfinder (HDLA1500/1507)Attach a large viewfinder to the panning base mounting
plate of the adaptor.
When using the HDVF-9900 viewfinder, attach the stopper
supplied with the adaptor to the side panel of the adaptor
(see page 15).
The viewfinder is to be attached to the camera when you
are using the HDLA1505. For the attaching procedure,
refer to the instruction manual furnished with the
viewfinder.
Viewfinder attachment mechanism
Camera lock
lever
[1500][1505] (The figure shows HDLA1500.)
Camera release
lever
[1507]
Caution
Note
(The figure shows HDLA1500.)
VF connector
V-shaped groove
Panning base mounting plate Panning lock lever
Depressions
Lock release tabs