Copying data to the HDD Photo Storage

This section explains how to use the COPY button on the unit to copy data from a “Memory Stick” or CompactFlash card to the internal hard disk of the unit.

Hint

For information on how to connect the unit to a computer to copy, see “Connecting to a computer” (page 26).

Notes

•The data read/write speed depends on the combination of “Memory Stick” and equipment.

•Data from a “Memory Stick” that has the access control attribute set on another device cannot be read or copied on the unit. To enable reading and copying of such data, you must first disable the access control on the other device.

•MagicGate-compatible data can be copied but not played back with the unit. Once MagicGate-compatible data is copied to the unit, it cannot be copied back to the “Memory Stick”, either.

1Turn on the unit.

Press the ! (power) button.

The “Welcome to SONY HDPS” appears on the unit display.

 

Slide the HOLD

!

switch in the

direction opposite to

 

 

that of the arrow.

!(power) button

Remaining internal hard disk capacity appears on the display when no media is inserted in the drives of the unit.

Remaining internal hard disk capacity

unit the to data Copying

23