Table of
contents
Operation
Search
Settings
Search Index
31GB
USB Power Supply
When connecting the camera to a computer or USB device with the micro USB cable (supplied),
the camera can be set so the connected device supplies power to it.
To make the setting, select [SETUP] first.
1Press the NEXT button to display [SETUP], then press the ENTER button.
2Press the NEXT button to display [USBPw] (USB Power), then press the
ENTER button.
3Press the NEXT button to select the setting, then press the ENTER
button.
• If you change the setting while the micro USB cable is connected, disconnect the cable, then reconnect.
• Power may not be supplied properly from a USB device with a power supply capacity of less than 1.5 A.
Supplies power from a connected device, through the micro USB cable.
Does not supply power from a connected device, through the micro USB cable.
Returns to the [USBPw] menu.
Notes
t
Setting
display
zHow to supply power from a wall outlet (wall socket)
Rapid charging is possible by using the USB charger AC-UD20 (sold separately). To
connect to the charger, use the micro USB cable (supplied).