Step 2: Charging the battery pack

DC IN jack

AC Adaptor Battery pack

You can charge the “InfoLITHIUM” battery pack (H series) after attaching it to your camcorder.

bNotes

•Your camcorder operates only with an “InfoLITHIUM” battery pack (H series).

1 Connect the AC Adaptor to the DC IN jack on the Handycam Station.

Be sure that the v mark on the DC plug is facing up.

2 Connect the power cord to the AC Adaptor and the wall outlet.

3 Slide the POWER switch in the direction of the arrow to OFF (CHG) (the default setting).

POWER

/CHG lamp

switch

 

DC plug

Power cord

To the wall outlet

4 Attach the battery pack by sliding it in the direction of the arrow until it clicks.

5 Place the camcorder on the Handycam Station as shown above, and insert it into the Handycam Station securely, all the way to the bottom.

The /CHG (charge) lamp lights up and charging starts. The /CHG (charge) lamp turns off when the battery pack is fully charged. Remove the camcorder from the Handycam Station.

Started Getting

9