52
GB
Delete unnecessary images (p. 38), or format
the memory card after storing the images on
other media (p. 48).
The image data base file may be damaged.
Check the data base file by selecting
[Setup] [ Media Settings] [Repair
Img. DB F.] the recording medium (HDR-
GWP88/GWP88E/GWP88V/GWP88VE).
The memory card is damaged.
Format the memory card with your camcorder
(p. 48).
Incompatible memory card is inserted (p. 23).
Access to the memory card was restricted on
another device.
There is something wrong with the flash.
The amount of lights is not sufficient, so
camera-shake easily occurs. Use the flash.
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steady with
both hands and record images. However, note
that the camera-shake warning indicator does
not disappear.
The recording medium is full.
Photos cannot be recorded during processing.
Wait for a while, then record.
When set to the following, you cannot shoot
photos during movie recording.
[REC Mode]: [Highest Quality ]
[ Frame Rate]: [60p] (HDR-GW66V/
GWP88/GWP88V) or [50p] (HDR-GW66E/
GW66VE/GWP88E/GWP88VE)
You can operate the SELF-REC button only
when the LCD panel is rotated 270 degrees to
the lens side.
Select [Setup] [ General
Settings] [[SELF-REC] Button] [Always
Active] to enable to operate the SELF-REC
button all the time.