Functions used for recording/playback, etc. (Continued)

To record in mirror mode ............

Open the LCD panel 90 degrees to the camcorder (), then rotate it 180 degrees to the lens side ().

•A mirror-image of the subject appears on the LCD screen, but the picture will be normal

28

when recorded.

 

To use the flash .......................

Press (flash) repeatedly to select a setting.

No indicator displayed: Automatically flashes when there is insufficient ambient light.

(Forced flash): Always uses the flash regardless of the surrounding brightness.

(No flash): Records without flash.

•The recommended distance to the subject when using the built-in flash is 0.5 to 2.5 m (1 5/8 to 8 ft.).

•Remove any dust from the surface of the flash lamp before using it. Flash effect may be impaired if heat discoloration or dust obscures the lamp.

•The flash charge lamp flickers when charging the flash, and remains lit when the battery charge is complete.

•You can only use the flash in the CAMERA- MEMORY mode.

•If you use the flash in bright places such as when shooting a backlit subject, the flash may not be effective.

•You can change the brightness of the flash by setting [FLASH LEVEL], or you can prevent the redeye by setting [REDEYE REDUC], in [FLASH SET] (p. 46).

To use a tripod ........................

Attach the tripod (optional: the length of the screw must be less than 5.5 mm (7/32 in.) to the tripod receptacle using a tripod screw.

Playback

To use PB zoom ..................



You can magnify still pictures on the “Memory Stick Duo” from about 1.5 to 5 times the original size.

Magnification can be adjusted with the power zoom lever or the zoom buttons

on the LCD frame.

Play back the picture you want to magnify.