Manuals / Brands / Photography / Camcorder / Sony / Photography / Camcorder

Sony HDR-SR10E Connecting to other devices, qk Flash, 7 (USB) jack, qd EASY button, 5HDMI OUT (mini) jack, qs (DISC BURN) button, ws Interface connector

1 32

Download 32 pages, 2.16 Mb

qd EASY button

Press EASY to display and most of the settings are set automatically for easy recording/playback. To cancel, press EASY again.

qf DISP/BATT INFO button

You can switch the screen display when you press while the power is set to on. When you press while the POWER switch is set to OFF (CHG), you can check the remaining battery.

qg . (back light) button

Press . (back light) to display . for adjusting the exposure for backlit subject. Press . (back light) again to cancel the backlight function.

qj Built-in microphone Sound picked up by the internal microphone is converted to 5.1ch surround sound and recorded.

qk Flash

The flash will flash automatically depending on recording conditions in the default setting.

Touch (HOME) t (SETTINGS)t[PHOTO SETTINGS] t [FLASH MODE] to change the setting.ql Remote sensor/Infrared port Receives the signal from the Remote Commander.w; Camera recording lamp

The camera recording lamp lights up in red during recording. The lamp flashes when the remaining media capacity or battery power is low.

wa Tripod receptacle (Bottom surface) Attach a tripod (optional) to the tripod receptacle using a tripod screw (optional: the length of the screw must be less than 5.5 mm (7/32 in.)).

Connecting to other devices5HDMI OUT (mini) jackConnect with the HDMI cable (optional).

6A/V Remote Connector/A/V OUT jackConnect with the component A/V cable or A/V connecting cable.7 (USB) jackConnect with the USB cable.qs (DISC BURN) button

Create a disc by connecting the camcorder to a computer, etc. For details, see “PMB Guide” (p. 25).

qh Active Interface Shoe

The Active Interface Shoe supplies power to optional accessories such as a video light, a flash, or a microphone. The accessory can be turned on or off as you operate the POWER switch on your camcorder.

ws Interface connectorConnect your camcorder and the Handycam Station.

16

Contents

© 2008 Sony Corporation Read this first ATTENTION Notice Regulatory Information Notes CAUTION Note Battery pack Supplied items Using the camcorder Types of “Memory Stick” you can use with your camcorder On recording On playing back recorded images on other devices Save all your recorded image data When the camcorder is connected to a computer Table of Contents Read this first Step 1: Charging the battery pack Step 2: Turning the power on, and setting the date and time Step 1: Charging the battery pack To remove the battery pack To charge the battery pack using only the AC Adaptor (Unit:min.) Step 2: Turning the power on, and setting the date and time Step 3: Selecting the media To select the media for still images To check the media setting 1 Insert the “Memory Stick PRO Duo.” 1Open the Memory Stick Duo cover in the direction of the arrow 3Close the Memory Stick Duo cover ACCESS lamp (“Memory Stick PRO Duo”) Recording Playback To adjust the sound volume of movies Operation flow Name and functions of each part qd EASY button qf DISP/BATT INFO button qg . (back light) button qk Flash Connecting to other devices 5HDMI OUT (mini) jack Connect with the HDMI cable (optional) 6A/V Remote Connector/A/V OUT jack Connect with the component A/V cable or A/V connecting cable Indicators displayed during recording/playback Recording movies Recording still images Viewing movies Viewing still images Upper left Center Upper right Bottom Performing various functions - “HOME” and “OPTION” To see the explanation of the HOME MENU (HELP) Items of the HOME MENU Saving images Connecting your camcorder to other devices Connecting with the A/V connecting cable Connecting with the USB cable Deleting images To delete all movies at one time To delete still images Enjoying with a computer Performing with a computer Installing and viewing “Handycam Handbook” (PDF) Attention To disconnect the USB cable Operating the “Picture Motion Browser” Troubleshooting Troubleshooting Notes before sending your camcorder for repair You cannot install “Picture Motion Browser.” •Check the computer environment required to install “Picture Motion Browser.” •Install “Picture Motion Browser” in the proper order (p. 24) Self-diagnosisdisplay/Warning indicators If indicators appear on the LCD screen, check the following Troubleshooting Page Additional Information Precautions On use and care LCD screen On handling the casing About care and storage of the lens To change the battery of the Remote Commander WARNING Specifications Printed in Japan